Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(c) Check only the valves indicated.
(1) Using a feeler gauge, measure the clearance between the valve lifter and camshaft.
Standard valve clearance (cold):
(2) Record any out-of-specification valve clearance measurements. They will be used later to determine the required replacement valve lifters.
10. ADJUST VALVE CLEARANCE
(a) Remove the No. 2 camshaft See: Engine, Cooling and Exhaust/Engine/Camshaft, Lifters and Push Rods/Camshaft/Service and
Repair/Removal.
(b) Remove the camshaft See: Engine, Cooling and Exhaust/Engine/Camshaft, Lifters and Push Rods/Camshaft/Service and Repair/Removal.
(c) Remove the valve lifters.
(d) Using a micrometer, measure the thickness of the removed valve lifters.
(e) Calculate the thickness of a new lifter so that the valve clearance comes within the specified range.
New lifter thickness:
CALCULATION EXAMPLE (Intake):
1. Measured intake valve clearance = 0.40 mm (0.0158 in.)
(Measured - Specification = Excess clearance)
1. 0.40 mm (0.0158 in.) - 0.24 mm (0.0095 in.) = 0.16 mm (0.0063 in.)
2. Measured used lifter thickness = 5.250 mm (0.2067 in.)
3. New lifter thickness = 5.410 mm (0.2130 in.)
(Excess clearance + Used lifter thickness = Ideal new lifter)
1. 0.16 mm (0.0063 in.) + 5.250 mm (0.2067 in.) = 5.410 mm (0.2130 in.)
4. Closest new lifter = 5.420 mm (0.2134 in.)
-
Select No. 42 lifter