Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-651008.png)
(h) Check that the paint marks on the chain are aligned with the timing marks on the camshaft timing gear and camshaft timing sprocket. Also,
check that the crankshaft pulley groove is aligned with the timing mark "0" of the timing chain cover.
13. INSTALL NO. 1 CHAIN TENSIONER See: Engine, Cooling and Exhaust/Engine/Timing Components/Timing Chain/Service and
Repair/Installation
14. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Timing Components/Timing Chain/Service
and Repair/Installation
15. INSTALL IGNITION COIL ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Installation
16. CHECK FOR ENGINE OIL LEAKS
17. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Installation
18. INSTALL FRONT FENDER APRON RH
19. INSTALL ENGINE UNDER COVER LH
20. INSTALL ENGINE UNDER COVER RH
21. INSTALL FRONT WHEEL RH
