Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-795003.png)
(a) Install a washer and nut to a new front axle hub bolt as shown in the illustration.
(b) Using a brass bar to hold the front axle, install the hub bolt by torquing the nut.
6. INSTALL FRONT DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Overhaul/Front/Reassembly
7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY See: Wheel Hub/Service and Repair/Front Axle Hub/Installation
8. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76ft-lbf)
