Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(a) Remove the IGCT fuse from the engine room R/B.
(b) Measure the IGCT fuse resistance.
Standard resistance:
Below 1 Ohms
(c) Reinstall the IGCT fuse.
NG -- REPLACE IGCT FUSE
OK -- Continue to next step.
4. CHECK HARNESS AND CONNECTOR (IGCT FUSE - BATTERY)
(a) Disconnect the positive battery terminal.
(b) Remove the IGCT fuse from the engine room R/B.
(c) Measure the resistance between the terminals.
Standard resistance (Check for open):
(d) Reinstall the IGCT fuse.
(e) Reconnect the positive battery terminal.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
5. INSPECT IGCT RELAY
(a) Remove the IGCT relay from the engine room R/B.
(b) Measure the resistance between the terminals.