Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
NG -- REPLACE CAN BUS MAIN WIRE (COMBINATION METER MAIN BUS WIRE)
OK -- REPLACE COMBINATION METER
7. CHECK FOR SHORT IN CAN BUS WIRES
(a) Reconnect CAN main bus wire connector E42 to the No. 1 CAN J/C "A" side (with earth terminal).
(b) Disconnect No. 2 CAN J/C connector E41 (rear of the vehicle).
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
OK -- CHECK FOR SHORT IN CAN BUS WIRES (A/C AMPLIFIER BRANCH WIRE)
NG -- Continue to next step.
8. CHECK FOR SHORT IN CAN BUS WIRES (NO. 2 CAN J/C - NO. 3 CAN J/C)