Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(a) Disconnect HV control ECU connector A61.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
HINT: Measure the resistance with No. 2 CAN J/C connector A40 disconnected.
NG -- REPLACE CAN BUS MAIN WIRE OR CONNECTOR (HV CONTROL ECU - NO. 2 CAN J/C)
OK -- REPLACE HYBRID VEHICLE CONTROL ECU
13. CHECK FOR SHORT IN CAN BUS WIRES (A/C AMPLIFIER BRANCH WIRE)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- CHECK FOR SHORT IN CAN BUS WIRES (A/C AMPLIFIER - NO. 2 CAN J/C)
OK -- Continue to next step.
14. CHECK FOR SHORT IN CAN BUS WIRES (RADIO AND NAVIGATION ASSEMBLY BRANCH WIRE)