Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
Accelerator Pedal Position Sensor: Testing and Inspection
ON-VEHICLE INSPECTION
1. CHECK ACCELERATOR PEDAL ROD
a. Put the engine in inspection mode.
b. Warm up the engine.
c. Turn the power switch off.
d. Connect the intelligent tester to the DLC3.
e. Turn the power switch ON (IG).
f.
Turn the tester on.
g. Enter the following menus: DIAGNOSIS / ENHANCED OBD II / DATA LIST.
h. Check the values by referring to the table.