Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1478003.png)
(a) Disconnect the air fuel ratio sensor connector.
(b) Using SST, remove the air fuel ratio sensor.
SST: 09224-00010
NOTICE: Do not damage the air fuel ratio sensor.
From 10-2006
2AZ-FXE EMISSION CONTROL: AIR FUEL RATIO SENSOR: REMOVAL
REMOVAL
1. REMOVE AIR CLEANER INLET ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Removal
2. REMOVE AIR FUEL RATIO SENSOR
(a) Disconnect the air fuel ratio sensor connector.
(b) Remove the wire harness clamp.
(c) Using SST, remove the air fuel ratio sensor.
SST: 09224-00010
NOTICE: Do not damage the air fuel ratio sensor.
From 03-2006 to 10-2006
2AZ-FXE EMISSION CONTROL: AIR FUEL RATIO SENSOR: INSTALLATION
INSTALLATION
1. INSTALL AIR FUEL RATIO SENSOR
(a) Temporarily tighten the air fuel ratio sensor.
NOTICE: Do not damage the air fuel ratio sensor.
