Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
Accelerator Pedal: Service and Repair
Hybrid Control System
REMOVAL
1. REMOVE ACCELERATOR PEDAL ROD
a. Disconnect the accelerator pedal position sensor connector.
b. Remove the 2 bolts and accelerator pedal rod.
INSTALLATION
1. INSTALL ACCELERATOR PEDAL ROD
NOTE:
-
Avoid physical shock to the accelerator pedal assembly.
-
Do not disassemble the accelerator pedal assembly.
a. Install the accelerator pedal rod with the 2 bolts.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
b. Connect the accelerator pedal position sensor connector.