Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1570003.png)
(2) Find the metallic connector of the fuel tube assembly.
(3) Assemble SST to the connection as shown in the illustration.
SST: 09268-21010
(4) Turn the SST, align the retainers inside the connector with the SST chamfered parts and insert the SST into the connector.
(5) Slide the SST and the connector together towards the fuel tube assembly.
(e) Observe the following precautions when connecting the fuel tube connector (metallic type):
(1) Check if there is any damage or foreign objects on the connecting part of the pipe.
(2) Match the axis of the connector with the axis of the pipe, and push into the connector until the connector makes a "click" sound. If the
connection is tight, apply a small amount of clean engine oil to the tip of the pipe.
(3) After finishing the connection, check if the pipe and the connector are securely connected by pulling on them.
(4) Check for fuel leaks.
(5) Install a new No. 2 fuel pipe clamp.
(f) Observe the following precautions when disconnecting the fuel tube connectors (Quick type A):
