Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
9. INSTALL NO. 2 ENGINE ROOM SIDE LH COVER
10. REMOVE V-RIBBED BELT TENSIONER COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets
and Accessories/Drive Belt/Service and Repair/Removal
11. REMOVE V-RIBBED BELT See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Removal
12. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Removal
13. DISCONNECT RADIATOR HOSE OUTLET See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and
Replacement/Radiator/Removal
14. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE See: Heating and Air Conditioning/Compressor HVAC/Service and
Repair/Removal
15. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE See: Heating and Air Conditioning/Compressor HVAC/Service and
Repair/Removal
16. REMOVE ELECTRIC INVERTER COMPRESSOR See: Heating and Air Conditioning/Compressor HVAC/Service and Repair/Removal
17. REMOVE CRANKSHAFT POSITION SENSOR
(a) Disconnect the crankshaft position sensor connector.
(b) Remove the connector clamp and wire harness clamp.
(c) Remove the wire harness clamp bracket from the wire harness.
(d) Remove the bolt, and then remove the crankshaft position sensor.