Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1664002.png)
NOTE:
-
Be sure to ground the spark plugs when checking.
-
Replace the ignition coil if it receives an impact.
-
Do not crank the engine for more than 2 seconds.
c. Perform the spark test according to the flowchart given.
1. Check that the ignition coil connector is securely connected.
2. Perform the spark test on each ignition coil.
1. Replace the ignition coil with a normal one.
2. Perform the spark test again.
3. Check the power supply to the ignition coil.
1. Turn the power switch on (READY).
2. Measure the voltage between the terminals of the wire harness side connector.
