toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Components|Page 6055 > < Components|Page 6053
Page 3
background image

(a) Disconnect the union to check valve hose from the brake booster.

(b) Disconnect the camshaft timing oil control valve connector.
(c) Remove the wire harness clamp.
(d) Remove the union to check valve hose from the vacuum hose clamp.
(e) Remove the 5 bolts, 2 nuts and intake manifold.

(f) Remove the gasket from the intake manifold.

19. REMOVE KNOCK SENSOR

(a) Disconnect the knock sensor connector.
(b) Remove the nut and knock sensor.

Components|Page 6055 > < Components|Page 6053