toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Procedures|Page 10912 > < Procedures|Page 10910
Page 29
background image

6. CONNECT REAR SEAT OUTER BELT ASSEMBLY (for RH Side) See: Rear Seat Outer Belt Assembly/Installation
7. INSTALL ROOF SIDE INNER GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof

Headlining/Installation

8. INSTALL ROOF SIDE INNER GARNISH RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof

Headlining/Installation

9. CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

(a) Connect the floor end of the rear seat inner with center belt assembly LH with the bolt.

Torque: 42 Nm (428 kgf-cm, 31ft-lbf)

NOTICE:  Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap the protruding parts of the floor panel.

(b) Check if the ELR locks.

NOTICE:  The check should be performed with the outer belt assembly installed.

(1) With the belt assembly installed, check that the belt locks when it is pulled out quickly.

10. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH

(a) Install the rear seat inner with center belt assembly RH with the bolt.

Torque: 42 Nm (428 kgf-cm, 31ft-lbf)

NOTICE:  Do not allow the anchor part of the rear seat inner with center belt assembly RH to overlap the protruding parts of the floor panel.

11. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH See: Child Restraint/Service and Repair/Installation
12. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH

HINT:  Use the same procedure for the RH side and the LH side.

13. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and

Repair/Roof Headlining/Installation

14. INSTALL REAR DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof

Headlining/Installation

15. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and

Repair/Roof Headlining/Installation

16. INSTALL REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof

Headlining/Installation

17. INSTALL REAR SIDE SEATBACK ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat

Assembly/Installation

18. INSTALL REAR SIDE SEATBACK ASSEMBLY RH

HINT:  Use the same procedure for the RH side and the LH side.

19. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and

Replacement/Rear Seat Assembly/Installation

20. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Removal and

Procedures|Page 10912 > < Procedures|Page 10910