toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1666 > < Initial Inspection and Diagnostic Overview|Page 1664
Page 3
background image

HINT:
-

The passenger airbag ON/OFF indicator is based on the timing chart given in order to check the indicator light circuit.

-

When the occupant classification system has trouble, both the SRS warning light and the passenger airbag ON/OFF indicator ("OFF")
come on. In this case, check the DTCs in "AIRBAG SYSTEM" first.

4. CHECK PASSENGER AIRBAG ON/OFF INDICATOR

a. Turn the power switch on (IG).
b. Check that the passenger airbag ON/OFF indicator ("ON" and "OFF") come on for approximately 4 seconds, then goes off for 

approximately 2 seconds.

HINT:  Refer to the table in step 3 regarding the passenger airbag ON/OFF indicator when the power switch is turned on (IG) and 
approximately 6 seconds pass.

Initial Inspection and Diagnostic Overview|Page 1666 > < Initial Inspection and Diagnostic Overview|Page 1664