Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
REMOVAL
1. PRECAUTION
CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing See: Restraint Systems/Air Bag Systems/Service
Precautions/Vehicle Damage Warnings.
2. REMOVE FRONT SEAT HEADREST ASSEMBLY
3. REMOVE SEAT TRACK COVER LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for
Power Seat)/Removal
4. REMOVE INNER SEAT TRACK BRACKET COVER LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly (for Power Seat)/Removal
5. REMOVE FRONT SEAT ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for
Power Seat)/Removal
6. REMOVE SEAT POSITION SENSOR
(a) Disconnect the connector.
NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.
(b) Using a "TORX" socket (T30), remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.
(c) Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.