Toyota Workshop Service and Repair Manuals

NOTICE:  When handling the airbag connector, take care not to damage the airbag wire harness.

2. INSTALL FRONT SEAT ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for

Power Seat)/Installation

3. INSTALL INNER SEAT TRACK BRACKET COVER LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat

Assembly (for Power Seat)/Installation

4. INSTALL SEAT TRACK COVER LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for

Power Seat)/Installation

5. INSTALL FRONT SEAT HEADREST ASSEMBLY
6. PERFORM INITIALIZATION

(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.

NOTICE:  Some systems need initialization after reconnecting the cable to the negative battery terminal.

7. INSPECT FRONT SEAT ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for

Power Seat)/Installation

8. PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK

(a) Perform zero point calibration and sensitivity check See: Restraint Systems/Testing and Inspection/Programming and Relearning.

9. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic

Overview/Airbag System/Diagnosis System.