Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2352002.png)
1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
HINT: Refer to the instructions for removal of the engine assembly See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal
and Replacement/Removal.
2. REMOVE ENGINE MOUNTING INSULATOR
(a) Remove the 3 nuts and the engine mounting insulator.
3. REMOVE FRONT SUSPENSION LOWER NO. 1 ARM
(a) Remove the 3 bolts and the nut on the front suspension lower No. 1 arm and remove it from the front frame assembly.
(b) Remove the front lower arm bushing stopper.
From 10-2006
SUSPENSION: FRONT SUSPENSION LOWER NO. 1 ARM: REMOVAL
REMOVAL
HINT:
-
Use the same procedures for the RH side and the LH side.
-
The procedures listed below are for the LH side.
1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
HINT: Refer to the instructions for removal of the engine assembly See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal
and Replacement/Removal.
2. REMOVE ENGINE MOUNTING INSULATOR
(a) Remove the 3 nuts and the engine mounting insulator.
3. REMOVE FRONT SUSPENSION LOWER NO. 1 ARM
