Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2352010.png)
(a) Remove the bolt, nut and the rear No. 1 suspension arm (outer side) from the rear axle carrier.
NOTICE: When removing the bolt, keep the nut from rotating.
14. SEPARATE REAR NO. 1 SUSPENSION ARM RH
HINT: Separate the RH side using the same procedures as for the LH side.
15. REMOVE REAR SUSPENSION MEMBER LOWER STOPPER LH
(a) Remove the 2 nuts and the rear suspension member lower stopper LH.
16. REMOVE REAR SUSPENSION MEMBER LOWER STOPPER RH
(a) Remove the 2 nuts and the rear suspension member lower stopper RH.
17. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY
(a) Support the rear suspension member with a jack.
(b) Remove the 2 bolts and the rear suspension member sub-assembly.
18. REMOVE REAR NO. 1 SUSPENSION ARM LH
