Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2368005.png)
(a) Support the front No. 1 suspension lower arm with a jack using a wooden block to avoid damage.
(b) Remove the nut and separate the front stabilizer link assembly from the front shock absorber.
HINT: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.
4. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING
(a) Loosen the lock nut of the front shock absorber with coil spring.
NOTICE:
-
Do not remove the lock nut.
-
Only loosen the nut when disassembling the front shock absorber with coil spring.
