Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
Shifter CVT: Adjustments
P311 HYBRID TRANSMISSION / TRANSAXLE: SHIFT LEVER: ADJUSTMENT
ADJUSTMENT
1. INSPECT SHIFT LEVER POSITION
(a) Apply the parking brake.
(b) Lock the wheels with chocks to secure the vehicle.
(c) Put the vehicle into the READY-on state.
(d) Move the shift lever to the D position and release the brake pedal.
NOTICE: Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.
(e) Slowly move the shift lever to the N position and measure moving distance (A) of the shift lever from the original point to the gear activation
point.
NOTICE: Be sure to move the shift lever slowly.
(f) Move the shift lever to the R position and release the brake pedal.
NOTICE: Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.
(g) Slowly move the shift lever to the N position and measure moving distance (B) of the shift lever from the original point to the gear activation
point.
NOTICE: Be sure to move the shift lever slowly.
(h) Check that moving distances (A) and (B) shown in the illustration are almost the same.
HINT:
-
If moving distances (A) and (B) are almost the same, adjustment of the shift lever position is not necessary.
-
If moving distance (A) is shorter than (B), perform adjustment of the shift lever position [*1].
-
If moving distance (B) is shorter than (A), perform adjustment of the shift lever position [*2].
2. ADJUST SHIFT LEVER POSITION
(a) If moving distance (A) is shorter than (B) [*1]: