Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(a) Using SST, remove the front drive shaft assembly LH.
SST: 09520-01010
SST: 09520-24010
09520-32040
NOTICE:
-
Be careful not to damage the drive shaft dust cover, boot, or oil seal.
-
Be careful not to drop the drive shaft assembly.
10. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH
(a) Using a screwdriver, remove the bearing bracket hole snap ring.
(b) Remove the bolt and front drive shaft assembly RH from the drive shaft bearing bracket.
NOTICE: Do not damage the boot or oil seal.
11. SECURE FRONT AXLE HUB SUB-ASSEMBLY
(a) Secure the front axle hub bearing.
SST: 09608-16042
09608-02021
09608-02041
NOTICE: The hub bearing may be damaged if it is subjected to the vehicle's full weight, such as moving the vehicle with the drive shaft
removed. If it is necessary to place the vehicle's weight on the hub bearing, first support it with SST.
12. INSPECT FRONT DRIVE SHAFT ASSEMBLY See: Testing and Inspection/Component Tests and General Diagnostics
From 03-2006 to 10-2006
DRIVE SHAFT: FRONT DRIVE SHAFT: INSTALLATION
INSTALLATION
1. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH