Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(a) Remove the nut from the control shaft lever.
(b) Using a screwdriver, disengage the 2 claws, and disconnect the transmission control cable assembly with the clip from the control cable
bracket.
HINT: Tape the screwdriver tip before use.
(c) Remove the clip.
6. REMOVE SHIFT LEVER POSITION SENSOR
(a) Disconnect the shift lever position sensor connector.
(b) Remove the nut, washer, and control shaft lever.
(c) Using a screwdriver, pry the tabs of the lock plate.