Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(h) Tighten the 2 bolts in the order shown in the illustration.
Torque: 13 Nm (133 kgf-cm, 10ft-lbf)
(i) Using a screwdriver, secure the nut with the lock plate.
(j) Install the control shaft lever, washer, and nut.
Torque: 13 Nm (133 kgf-cm, 10ft-lbf)
2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Move the shift lever to the N position.
(b) Install a new clip to the control bracket.
(c) Install the transmission control cable assembly to the control bracket.
NOTICE:
-
Make sure that the A claws on the clip are securely fit into the bracket holes.
-
Make sure that the cable is securely installed inside the B claws of the clip.