toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Headliner|Specifications|Page 6724 > < Headliner|Specifications|Page 6722
Page 2
background image

a. Using a screwdriver, remove the rear door scuff plate.

HINT:  Tape the screwdriver tip before use.

b. Employ the same manner described above to the other side.

18. REMOVE REAR DOOR SCUFF PLATE LH
19. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
20. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
21. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
22. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
23. REMOVE CENTER PILLAR GARNISH LOWER RH

a. Pull the center pillar lower garnish upward to remove it.
b. Employ the same manner described above to the other side.

24. REMOVE CENTER PILLAR GARNISH LOWER LH
25. REMOVE CENTER PILLAR GARNISH UPPER RH

a. Using a screwdriver, remove the lap belt outer anchor cover.

HINT:  Tape the screwdriver tip before use.

b. Remove the bolt and front seat outer belt floor anchor.

Headliner|Specifications|Page 6724 > < Headliner|Specifications|Page 6722