Camry V6-3.0L (1MZ-FE) (2004)
(a) Install the brake actuator with the 3 nuts.
Torque: 19 Nm (194 kgf-cm, 14 ft-lbf)
(b) Connect the brake actuator connector.
(c) Using SST connect each brake line to the correct position of brake actuator as shown in the illustration.
SST 09023-00100
Torque: 15 Nm (155 kgf-cm, 11 ft.-lbf)
6. FILL RESERVOIR WITH BRAKE FLUID
7. BLEED MASTER CYLINDER
SST 09023-00100
8. BLEED BRAKE LINE
9. CHECK FLUID LEVEL IN RESERVOIR
10. CHECK BRAKE FLUID LEAKAGE
11. CHECK OPERATION OF BRAKE ACTUATOR