Camry V6-3.0L (1MZ-FE) (2004)
/Page-396002.png)
-
After installing the drive belt, check that it fits properly in the ribbed grooves.
-
Check that the drive belt fits properly in the ribbed grooves.
4. FULLY TIGHTEN V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
a. Tighten the bolt A.
Torque: 17.5 N.m (178 kgf.cm, 12 ft.lbf)
b. Tighten the bolt C.
Torque: 58 N.m (591 kgf.cm, 43 ft.lbf)
