Camry V6-3.0L (1MZ-FE) (2004)
7. REMOVE EMISSION CONTROL VALVE SET (3MZ-FE ENGINE TYPE)
a. Disconnect the 2 VSV connectors.
b. Remove the wire harness clamp.
c. Disconnect the fuel vapor feed hose No. 1.
d. Disconnect the fuel vapor feed hose No. 2.
e. Disconnect the 2 vacuum hoses.
f.
Remove the clamp.
g. Remove the 2 nuts and the emission control valve set.
8. REMOVE INTAKE AIR SURGE TANK
a. Disconnect the throttle motor connector.
b. Disconnect the water bypass hose No. 3.
c. Disconnect the water bypass hose No. 2.
d. Disconnect the union to check valve hose.