Camry V6-3.0L (1MZ-FE) (2004)
Terminals Of ECU - Check Instrument Panel Junction Block Assy (Body ECU) (Rear Side)
2. CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSY (BODY ECU) (REAR SIDE)
a. Disconnect the 2B, 2F and 2G instrument panel J/B connectors, and check the continuity and voltage of each terminal of the disconnected
connector.
Standard:
If the result is not as specified, there may be a malfunction on the wire harness side.
b. Reconnect the 2B, 2F and 2G instrument panel J/B connectors, and check the voltage of each terminal of the connectors.
Standard:
If the result is not as specified, the vehicle may be defective. In this case, check the harness, connector and fuse between the ECU and battery.