Camry V6-3.0L (1MZ-FE) (2004)
HINT:
-
Do not fit in while holding the outer.
-
When fitting in, the outer slides. Do not touch it.
NOTE REGARDING AIRBAG SENSOR INSTALLATION BOLT
a. As the tightening torque is different depending on the property class of the airbag sensor installation bolt, choose a bolt referring to the following
illustration and tighten with the specified tightening torque.
Left Side
REPLACEMENT
1. PRECAUTION
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. REMOVE ENGINE UNDER COVER LH
4. REMOVE AIR BAG SENSOR FRONT LH
a. Remove the bolt and front airbag sensor LH.