Camry V6-3.0L (1MZ-FE) (2004)
VEHICLE NOT INVOLVED IN COLLISION
a. Perform a diagnostic system check.
b. Perform a visual check which includes the following items with the front seat airbag assy installed in the vehicle: Cuts, minute cracks or marked
discoloration on the front seat back assy around the front seat airbag assy.
VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
a. Perform a diagnostic system check.
b. Perform a visual check which includes the following items with the front seat airbag assy removed from the vehicle:
-
Cuts, minute cracks or marked discoloration on the front seat airbag assy.
-
Cracks or other damage in the wire harness or connector.
HORN BUTTON ASSEMBLY
CAUTION: Be sure to perform the initialization of the occupant classification ECU under the conditions listed below. If the initialization is not
performed, the SRS may not operate properly.
-
The occupant classification ECU is replaced.
-
Accessories (seatback tray or seat cover, etc.) are installed to the vehicle.
-
The passenger seat is removed from the vehicle.
-
Both the SRS warning light and passenger airbag ON/OFF indicator light ( OFF ) come on.
-
The vehicle is brought to the workshop for repair purpose due to the accident or collision.
VEHICLE NOT INVOLVED IN COLLISION
a. Perform a diagnostic system check.
b. Perform a visual check which includes the following items with the horn button assy installed in the vehicle: Cuts, minute cracks or marked
discoloration on the horn button assy top surface and in the grooved portion.