Camry V6-3.0L (1MZ-FE) (2004)
/Page-1230008.png)
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
AIRBAG SENSOR ASSEMBLY CENTER
CAUTION: Be sure to perform the initialization of the occupant classification ECU under the conditions listed below. If the initialization is not
performed, the SRS may not operate properly.
-
The occupant classification ECU is replaced.
-
Accessories (seatback tray or seat cover, etc.) are installed to the vehicle.
-
The passenger seat is removed from the vehicle.
-
Both the SRS warning light and passenger airbag ON/OFF indicator light ( OFF ) come on.
-
The vehicle is brought to the workshop for repair purpose due to the accident or collision.
VEHICLE NOT INVOLVED IN COLLISION
Perform a diagnostic system check.
VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
Perform a diagnostic system check.
VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED
Replace the airbag sensor assembly center.
AIRBAG SENSOR FRONT
CAUTION: Be sure to perform the initialization of the occupant classification ECU under the conditions listed below. If the initialization is not
performed, the SRS may not operate properly.
-
The occupant classification ECU is replaced.
-
Accessories (seatback tray or seat cover, etc.) are installed to the vehicle.
-
The passenger seat is removed from the vehicle.
-
Both the SRS warning light and passenger airbag ON/OFF indicator light ( OFF ) come on.
-
The vehicle is brought to the workshop for repair purpose due to the accident or collision.
VEHICLE NOT INVOLVED IN COLLISION
Perform a diagnostic system check.
VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
a. Perform a diagnostic system check.
b. When the front bumper of the vehicle or its periphery is damaged, check if there is any damage to the airbag front sensor. If there are any defects
as mentioned below, replace the airbag front sensor with a new one:
-
Cracks, dents or chips in the case
-
Cracks or other damage in the connector
-
Peeling off of the label or damage to the serial number
VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED
Replace the airbag front sensor.
AIRBAG SENSOR REAR
CAUTION: Be sure to perform the initialization of the occupant classification ECU under the conditions listed below. If the initialization is not
performed, the SRS may not operate properly.
-
The occupant classification ECU is replaced.
-
Accessories (seatback tray or seat cover, etc.) are installed to the vehicle.
-
The passenger seat is removed from the vehicle.
-
Both the SRS warning light and passenger airbag ON/OFF indicator light ( OFF ) come on.
-
The vehicle is brought to the workshop for repair purpose due to the accident or collision.
VEHICLE NOT INVOLVED IN COLLISION
Perform a diagnostic system check.
VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
a. Perform a diagnostic system check.
b. When the quarter panel of the vehicle or its periphery is damaged, check if there is any damage to the airbag sensor rear. If there are any defects as
mentioned below, replace the airbag sensor rear with a new one:
-
Cracks, dents or chips in the case
-
Cracks or other damage in the connector
-
Peeling off of the label or damage to the serial number
