Camry V6-3.0L (1MZ-FE) (2004)
a. Using SST, install the 2 knock sensors.
SST 09249-63010, 09816-30010
Torque: 39 N.m (398 kgf.cm, 29 ft.lbf)
b. Connect the 2 knock sensors.
12. INSTALL KNOCK SENSOR (3MZ-FE ENGINE TYPE)
a. Install the 2 knock sensors with the 2 nuts, as shown in the illustration.
Torque: 20 N.m (199 kgf.cm, 14 ft.lbf)
b. Connect the 2 knock sensor connectors.
13. INSTALL WATER OUTLET
a. Install 2 new gaskets to the 2 cylinder heads.
b. Install the water outlet together with the water bypass hose No. 1 and unlock the hose clamp.
c. Tighten the 2 bolts, 2 nuts and 2 washers.
Torque: 15 N.m (153 kgf.cm, 11 ft.lbf)
d. Install the clamp.
e. Connect the ECT sensor connector.
f.
Connect the radiator hose inlet.
14. INSTALL INTAKE MANIFOLD