Camry V6-3.0L (1MZ-FE) (2004)
Impact Sensor: Testing and Inspection
Front / Rear Airbag Sensor
AIRBAG FRONT SENSOR (VEHICLE NOT INVOLVED IN COLLISION)
a. Do a diagnostic system check. *
AIRBAG FRONT SENSOR (VEHICLE INVOLVED IN COLLISION)
a. Do a diagnostic system check. *
b. If the front fender of the car or its periphery is damaged, do a visual check for damage to the airbag front sensor, which includes the following
items even if the airbag was not deployed:
-
Cracks, dents or chips in the case
-
Cracks, dents, chipping and scratches in the connector
-
Peeling off of the label or damage to the serial number
AIRBAG SENSOR REAR (VEHICLE NOT INVOLVED IN COLLISION)
a. Do a diagnostic system check. *
AIRBAG SENSOR REAR (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED)
a. Do a diagnostic system check. *
AIRBAG SENSOR REAR (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)
a. Replace the curtain shield airbag assembly and airbag sensor rear.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview