Camry V6-3.0L (1MZ-FE) (2004)
/Page-1027002.png)
2. REMOVE BATTERY TRAY
3. REMOVE AIR CLEANER INLET ASSEMBLY
a. Disconnect the VSV connector.
b. Remove the 2 wire harness clamps.
c. Remove the vacuum hoses from the hose clamp.
d. Remove the 2 bolts and air cleaner inlet.
4. REMOVE AIR CLEANER ASSEMBLY
a. Disconnect the MAF meter connector.
b. Disconnect the 4 vacuum hoses.
c. Loosen the 2 air cleaner cap bolts.
d. Loosen the air cleaner hose clamp bolt and remove the air cleaner cap.
e. Remove the air cleaner filter element.
f.
Remove the wire harness from the 2 wire harness clamps.
g. Disconnect the vacuum hose.
h. Remove the 3 bolts and air cleaner case.
