Camry V6-3.0L (1MZ-FE) (2004)
(a) Set the accessory tool.
(1) Shift the shift lever to P position and turn the ignition switch to the LOCK position. (TMC made)
(2) Shift the shift lever to N position and turn the ignition switch to the ACC. position (TMMK made)
(3) Set the accessory tool to the shift lock control unit assy as shown in the illustration.
Accessory tool parts No.:
TMC Made: 33693-33010
TMMK Made: 33693-06010
HINT: Only in the case of reusing the shift lock control unit assy.
(b) Using a screwdriver, unlock the claw of the lock key of automatic adjustment part.
(c) Insert the lever pin into the hole in the floor shift parking lock cable.
HINT: Ensure that the claws fit tightly.
(d) Lock the lock key.
HINT:
-
At this time, the shift lever should be in P position and the ignition key should be set to LOCK position. (TMC Made)
-
At this time, the shift lever should be in N position and the ignition key should be set to ACC position. (TMMK Made)
(e) Remove the accessory tool.
Accessory tool parts No.:
TMC Made: 33693-33010
TMMK Made: 33693-06010