Camry V6-3.0L (1MZ-FE) (2004)
b) Remove the bolt and separate the speed sensor front LH from the steering knuckle.
NOTICE: Prevent foreign matter from adhering to the speed sensor.
7. SEPARATE TIE ROD END SUB-ASSY LH
a) Remove the cotter pin and nut.
b) Using SST, separate the tie rod end sub-assy from the steering knuckle.
SST 09628-62011
8. SEPARATE FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH
a) Remove the bolt and 2 nuts, and separate the front suspension arm sub-assy lower No. 1 LH from the lower ball joint.
9. SEPARATE FRONT AXLE ASSY LH