Camry V6-3.0L (1MZ-FE) (2004)
Clearance: 1.9 mm (0.075 inch) or less
NOTICE: When the measured value is greater than the specified value, retighten the clamp.
44. INSPECT FRONT DRIVE SHAFT
a) Check that there is no remarkable play in the radial direction of the outboard joint.
b) Check that the inboard joint slides smoothly in the thrust direction.
c) Check that there is no remarkable play in the radial direction of the inboard joint.
d) Check the boots for damage.
HINT: For dimension (A), refer to the table.
1MZ-FE, 3MZ-FE
2AZ-FE
45. INSTALL FRONT DRIVE SHAFT ASSY LH