toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Antitheft and Alarm Systems > < Antenna Cable|Service and Repair|Page 5758
Page 5
background image

47. REMOVE ANTENNA CORD SUB-ASSEMBLY

a. Remove the nut and 2 bolts.
b. Disconnect the connectors.
c. Remove the 12 clamps and antenna cord sub-assembly.

48. INSTALL REAR SEAT INNER W/CENTER BELT ASSEMBLY RH (TMC MADE)
49. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY OUTER (TMC MADE)
50. INSTALL REAR SEAT INNER W/CENTER BELT ASSEMBLY LH (TMC MADE)
51. INSTALL REAR SIDE SEAT BACK ASSEMBLY LH (TMC MADE)
52. INSTALL REAR SIDE SEAT BACK ASSEMBLY RH (TMC MADE) 
53. INSTALL REAR SEAT BACK ASSEMBLY RH
54. INSTALL REAR SEAT BACK ASSEMBLY LH 
55. INSTALL FRONT SEAT ASSEMBLY LH (POWER SEAT)
56. INSTALL FRONT SEAT ASSEMBLY LH (MANUAL SEAT)
57. INSTALL FRONT SEAT ASSEMBLY RH (POWER SEAT)
58. INSTALL FRONT SEAT ASSEMBLY RH (MANUAL SEAT)

Antitheft and Alarm Systems > < Antenna Cable|Service and Repair|Page 5758