Camry V6-3.3L (3MZ-FE) (2005)
Valve Clearance: Adjustments
VALVE CLEARANCE
ADJUSTMENT
1. DRAIN ENGINE COOLANT
2. REMOVE FRONT FENDER APRON SEAL RH
3. REMOVE V-BANK COVER SUB-ASSEMBLY
a. Using a socket hexagon wrench 5, remove the 3 nuts.
b. Remove the V-bank cover.
4. REMOVE RADIATOR HOSE INLET
5. REMOVE FRONT SUSPENSION UPPER BRACE CENTER (W/ FRONT SUSPENSION BRACE UPPER CENTER)
6. REMOVE AIR CLEANER ASSEMBLY WITH HOSE
7. REMOVE EMISSION CONTROL VALVE SET
a. Disconnect the 2 VSV connectors.
b. Remove the wire harness clamp.
c. Disconnect the fuel vapor feed hose No. 1.
d. Disconnect the fuel vapor feed hose No. 2.
e. Disconnect the 2 vacuum hoses.
f.
Remove the clamp.
g. Remove the 2 nuts and the emission control valve set.
8. REMOVE INTAKE AIR SURGE TANK