Camry V6-3.3L (3MZ-FE) (2005)
/Page-1162001.png)
Seat Belt Reminder Buzzer: Testing and Inspection
INSPECT SEAT BELT WARNING BUZZER
a. When only driver's seat is occupied.
1. Turn the ignition switch to ON and check that the driver's seat belt warning sounds if the driver's seat belt is not fastened about 1.8 seconds
after the ignition switch is turned to ON.
2. Check that the buzzer stops after about 6 seconds.
b. When both driver's seat and passenger's seat are occupied
1. When either of the seat belts for the driver seat and front passenger seat is not fastened within 13.8 seconds after the ignition switch is turned
to ON, the buzzer sounds for 9.6 seconds.
2. When the seat belt is still not fastened after that, the buzzer is switched to level 2 and sounds for 20 seconds.
