Camry V6-3.3L (3MZ-FE) (2005)
/Page-922003.png)
b. Adjust the V belt tension by tightening bolt C.
c. Tighten bolts A and B.
Torque:
58 Nm (592 kgf.cm, 43 ft.lbf) for bolt A
18 Nm (184 kgf.cm, 13 ft.lbf) for bolt B
d. Install the generator wire with the nut.
Torque: 9.8 Nm (100 kgf.cm, 7 ft.lbf)
e. Connect the generator connector.
f.
Install the wire harness clamp.
3. INSPECT DRIVE BELT
