Camry V6-3.3L (3MZ-FE) (2005)
Alternator: Service and Repair
Disassembly and Reassembly
OVERHAUL
1. REMOVE GENERATOR PULLEY
SST 09820-63010 09820-06010, 09820-06020.
a. Hold SST (1-A) with a torque wrench, and tighten SST (1-B) clockwise to the specified torque.
Torque: 39 Nm (400 kgf.cm, 29 ft.lbf)
NOTE: Check that SST is secured to the rotor shaft.
b. Clamp SST (2) in a vise.
c. Insert SST (1-A, B) into SST (2), and attach the pulley nut to SST (2).
d. To loosen the pulley nut, turn SST (1-A) in the direction shown in the illustration.
NOTE: To prevent damage to the rotor shaft, do not loosen the pulley nut more than one-half turn.
e. Remove the generator from SST (2).