Camry V6-3.3L (3MZ-FE) (2005)
a. Using a screwdriver, remove the transmission control switch from the floor shift assembly.
b. Using a screwdriver, release the stopper of the connector.
c. Using a small screwdriver, disengage the locking lug of the terminals 1, 2 and 6 and pull the terminals out from the rear.
23. INSTALL TRANSMISSION CONTROL SWITCH
a. Install the 3 terminals into the indicator lamp wire connector.
b. Install the transmission control switch to the floor shift assembly.
24. INSTALL POSITION INDICATOR HOUSING LOWER
a. Install the position indicator housing lower with the shift lever lock pin and a new shift lever nut No.1.