Camry V6-3.3L (3MZ-FE) (2005)
/Page-765008.png)
29. INSTALL POSITION INDICATOR HOUSING UPPER
a. Install the control position indicator housing upper.
HINT: Ensure that the claws fit tightly.
30. INSTALL SHIFT LEVER KNOB BUTTON
a. Apply MP grease to the shift lever knob button and compression spring and install them to the shift lever knob.
HINT: Ensure that the claws fit tightly.
31. INSTALL TRANSMISSION CONTROL SWITCH
a. Install the transmission control switch to the shift lever knob.
HINT: Ensure that the claws fit tightly.
32. INSTALL POSITION INDICATOR SLIDE COVER
a. Install the position indicator slide cover to the floor shift assembly.
33. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
a. Install the 2 terminals into the indicator lamp wire connector.
