Camry V6-3.3L (3MZ-FE) (2005)
a) Using SST and hammer, unstake the staked part of the axle hub LH nut.
SST 09930-00010
NOTICE: Loosen the staked part of the nut completely, otherwise the screw of the drive shaft may be damaged.
b) While applying the brakes, remove the lock axle hub LH nut.
5. SEPARATE FRONT STABILIZER LINK ASSEMBLY LH
a) Remove the nut and separate the stabilizer link assembly LH.
HINT: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.
6. SEPARATE SPEED SENSOR FRONT LH
a) Remove the bolt and clip and separate the sensor wire and hose from the shock absorber.
NOTICE: Be careful not to damage the speed sensor.