Camry V6-3.3L (3MZ-FE) (2005)
/Page-780008.png)
a) Remove the inboard joint boot LH clamp, as shown in the illustration.
16. SEPARATE FR AXLE INBOARD JOINT BOOT
a) Separate the inboard joint boot from the inboard joint assembly.
17. REMOVE FRONT DRIVE INBOARD JOINT ASSEMBLY LH
a) Put matchmarks on the inboard joint assembly and outboard joint shaft.
NOTICE: Do not use a punch for the marks.
b) Remove the inboard joint assembly from the outboard joint shaft.
c) Using a snap ring expander, remove the shaft snap ring.
