Camry V6-3.5L (2GR-FE) (2008)
Antenna Amplifier: Service and Repair
Removal
AUDIO / VISUAL: AMPLIFIER ANTENNA:
REMOVAL
1. REMOVE REAR SEAT HEADREST ASSEMBLY
2. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY
3. REMOVE REAR SEAT CUSHION ASSEMBLY (See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Reclining Seat
Type)/Removal)
4. REMOVE REAR SEAT BACK ASSEMBLY (for Fixed Seat Type) (See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for
Fixed Type)/Removal)
5. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY RH (for Fold Down Seat Type) (See: Body and Frame/Seats/Service and
Repair/Rear Seat Assembly (for Fold Down Seat Type)/Removal)
6. REMOVE REAR SIDE SEAT BACK ASSEMBLY RH (for Fold Down Seat Type) (See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly (for Fold Down Seat Type)/Removal)
7. REMOVE REAR SEAT BACK COVER (for Reclining Seat Type) (See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for
Reclining Seat Type)/Removal)
8. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY RH (for Reclining Seat Type) (See: Body and Frame/Seats/Service and
Repair/Rear Seat Assembly (for Reclining Seat Type)/Removal)
9. REMOVE REAR DOOR SCUFF PLATE RH (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal)
10. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH
11. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY RH (for Reclining Seat Type)
12. REMOVE ROOF SIDE INNER GARNISH RH
HINT: Use the same procedures for the RH side and the LH side (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal).
13. REMOVE AMPLIFIER ANTENNA ASSEMBLY
(a) Disconnect each connector.
(b) Standard audio system:
(1) Remove the bolt and amplifier antenna assembly.
(c) Premium audio system:
(1) Remove the 2 bolts and amplifier antenna assembly.