Camry V6-3.5L (2GR-FE) (2008)
(c) Engage the 2 pins and install the steering pad switch assembly.
(d) Install the screw and engage the clamp.
Torque: 2.4 Nm (24 kgf-cm, 21 in-lbf)
(e) Connect the connector to the spiral cable.
4. INSTALL STEERING PAD SWITCH LH (for 3 Spoke)
(a) Engage the 2 pins and install the steering pad switch LH.
(b) Install the screw and engage the clamp.
Torque: 2.4 Nm (24 kgf-cm, 21 in-lbf)
(c) Connect the connector to the spiral cable.
5. INSTALL STEERING PAD (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation)
6. INSTALL NO. 3 LOWER STEERING WHEEL COVER (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation)
7. INSTALL NO. 2 LOWER STEERING WHEEL COVER (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation)
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. INSPECT SRS WARNING LIGHT
(See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System)