Camry V6-3.5L (2GR-FE) (2008)
1. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the name plate. (If reusing the name plate)
(1) Using a heat light, heat the name plate.
(2) Remove the double-sided tape from the name plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the name plate.
(c) Install the name plate.
(1) Using a heat light, heat the vehicle body and name plate.
(2) Remove the release paper from the name plate.
HINT: After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the name plate.
2. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the name plate. (If reusing the name plate)
(1) Using a heat light, heat the name plate.
(2) Remove the double-sided tape from the name plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the name plate.
(c) Install the name plate.
(1) Using a heat light, heat the vehicle body and name plate.
(2) Remove the release paper from the name plate.
HINT: After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the name plate.
For name plate LE:
For name plate XLE: